кто нибудь шил Samsung SCX3405 debug-кабелем

[MADBeasT]

кто нибудь шил Samsung SCX3405 debug-кабелем? Влили необновляемую прошивку с неправильным серийником. Не получается прошить через debug.

[pro_vi]

кто нибудь шил Samsung SCX3405 debug-кабелем?

много кто шил
перемычку запаяли, команды вводить можете?
лог терминала в студию.....

[MADBeasT]

перемычку поставил.
команды вводить могу.
Как войти в режим probe?

[MADBeasT]

Ke
User: targetd End vxTarget

Loading boot application...el was found (0x01500000)..

Loading boot application...100000, ul_s
[NG0x0000FDB1]

Boot : Egmont(C3N) V0.12 08-01-2011o RAM

Boot : Egmont(C3N) V0.12 08-01-2
srcdel
<Winbond W25Q32>, dest_addr = 0x0

Press any key to execute Monitor Program within 1 sec...

Press any key to execute Monitor Pro

Decompress ......
Kernel Data Read Start From Serial Flash.......................000........................
Kernel Data Read Endata Read Start From
Loading boot application...
User:
Da
[NG0x0000FDB1]ownload from e Read Start From Serial Flas

Boot : Egmont(C3N) V0.12 08-01-2011
<Winbond W25Q32>0x00100000, ul_
No
<Winbond W25Q32>
Ker

Upgrade Fad End

Press any key to execute Monitor Program with=======================1500000)......
Decompr
GO MonitorEntryart flash_write.........

------------------------------------------------------ddr = 0x00100000, uom
<Winbond W2
Decomp
Can not find signature

Decompress ..
No..
vxshell> fload Image f....

Upgrade Flash
Samsung OTG, 2006
<Winbond W25Q32> : [4F54281A] = [
<Winbond W25Q32>
Verify Image : 0x01900000 Program within 1 sec...
--------------------
i_header->pul_start_addr :>e command info
Image i
i_header->ul_count : 0x00000000ssh12 08-01-2011
Model : 0x00000000s received]] - CompleteEnd Egmont(C3N) V0.12 0
Flash Type : 0x000pressed Kernel was
....Done.<HS0000)...nbon
{H25
Ready to download from Parallel/Usb/Serial (0x01900000)000001B) -> Waste 92 bytesompressing Kernel t0100000]E : Monitor Pr
Image Type : 0x00000000
temp_buf
Kernel Da
Link ID : [4F54281A] = [4F542000] Download End */: 0000A5A5
Target Name: vxTarget
Ke
Use
} /* Checksum End

Lo
------------------------- : 0x01900000x01500000)..
Boot image!
....Done.<HS><HS> kernel(0x01940

Boot : Egmont(C3N) V0.12 08-0
i_headerAM
Image includes PJL(0000001B)............................32>, dest_addr = 0x0


i_header->ul_count :..tor Program within 1 sec...
Verify Image : 0x01900000

Decompress ....
... Done
Ke

i_header->pul_start_add Serial Flash..........
SIG : $IMGoading boo

FlashCheckSum.

Boot : Egmont(C3N) V0.12 08-01-2011
===============================0000
Kernel Start [

FW
<Winbond W25Q32>384DD4r

Press any key to execute Monitor Program within 1 sec...ame: bootHost
Samsung OTG, 2006
<Winbond W2
Kernel Data Read Start From Serial Flash
Verify Image
User: target


Kernel Data Read Endion...-----------------
Compressed Kernel was found (0x01500000)... Boot : Egmont(C3N) V0.12 08-01-2011
i_header->ul_count : 0x00000000s

Decompressing Kernel to RAMceived]] - Complete
<Winbond W25Q32>
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00
{H
Ready to download from Parallel/Usb/Serial (0x01900000)000001
Kernel Data92 bytes

Decompress ...................................................................mage Type : 0x00000000
temp_buf

-------------------------

Press any key to execute Monitor Program within 1 sec...mage!
....Done.<HS><HS> kernel(0x01940
Target Name: vxTarget
i_header

Kernel Data Read Start From Serial Flashrnel Data Read Start From Serial Flash
i_header->ul_count :..
Kernel Data Read Endmage : 0
Ke90
Compressed Kernel was found (0x01500000)...essed Kernel was found (0x01500000)...d
SIG : $IMGoading boo

FlashCheckSum.
Decompressing Kernel to
Decompre
Loading boot application...rt From Serial Flash
[NG0x0000FDB1]

Boot : Egmont(C3N) V0.12 08-01-2011....................................
<Winbond W25Q32>.....Kernel was f

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntryd Start From Se Done Kernel
D

-------------------------------------------.................................ul_size =
Kernel Data Read End
START-UP MODE : Monitor Programx01500000)...
... Done
cur :
[Type 'help' to see command i


Kernel D

===============================pgrade JUMP : 00384DD4
User: target


Kernel D
Start flash_writertWriteMonitorProgram :Compressed Kernel was found (0x01500000)...
===============================011
<Winbond W25Q32>
Target Name: vx
Decompressing
Verify Image : 0x01900000et
<Winbond W25Q32>
src

Loading boot applicatt_addr = 0x00100000,
i_header->pul_start_addr : 0x00000000x0000FDB1]
Kernel

Boot : Egm

Decomp
i_header->ul_count : 0x00000000..................................
<Winbond W25
{d
Ready to download from Parallel/Usb/Serial (0x01900000)et Name: vxTarget
Kernel Data Read
Decompressing Kernel to RAM Data Read Start From Seria
Kernel Start [0x00100
[[4194424 Bytes received]] - Complete Downloading00384DD4mmand info.]
Ke
Compressed Kernel was found (0x01500000)...essed K
RootWriteMond (0x01500000

} /* Download End */Host Name: bootHost0

Verify Image : 0x01900000
Decompre

------
Flash Type : 0x00130002t

Loading b
No a
<Wintion.
Image Type : 0x00000000de F
[NG0x0000FDB1]

Press any key to eN) V0.12 08-01-201
temp_buf : $KERrogram with====
<Winbond W25Q32>
SIG : $IMG========any key to execute

FlashCheckSumm within 1 se
GO Moni

check sum start address : 0190001C, count : 00400000-------------------------

-------------------------------------------
check sum : 0W2
R
... Doneownloaa Read End


cur : 0x8, new : 0x8==========00000)tor Programx01500000)...
This is a valid image.!!!!tart flash_writerhelp' to see command i
-


Boot : Egmont(C3N) V0.12 08-01-2011-----------------

==============
i_header========
i_headeart_add0384DD4
<Winbond W25Q32>: 0x00000000i_header->ul_count : 0xash_writertWriteMonitorProgram :

Press any key to execute Monitor Program within 1 sec...: 0x00000000s received]] - Complete25Q32>
Target Name: vx
Verify Image : 0x0190000
Flash Type : 0x000
Decompressing Kernel to RAMx01900000)0x00000000i_header->pul_start_addr : 0x00000000x0000FDB1]
te
src_addr = 0x0150000C, dest_addr = 0x00100000, ul_size = 0x0028AC00_header->ul_count : 0x00000000

check sum start address : 01

Can not find signature
Kernel
Boot image!
....Done.<HS><HS> kernel(0x019Cmpressed Kernel was fo
....Done.<HS><HS>
Image includeto download f
Image includes..............900000)
... Done01B) ->_header->ul_cou
Decompressing Kernel to RA
Kernel Start [0x00100000]
Kernel Start [0x00100
Verify Image
[[41

FW Upgrade JUMP : 00384DD4eived]] - Complete DoDD4mmand info.]

i_header->pul_start_add
RootWriteM
Source Checksum is valid...ad End */Host Name: bootHos
[Type 'help' to see command info.]

Verify Image : 0x
Found new kernel(0x0194001C)!!!!r
------

temp_buf : $KERrogram with====
... Done
.

Start flash_writer8, new : 0x8

FlashCheckSum
Compressed Kernecheck sum start
Kernel Data Read Start From SerialEgmont(C3N) V0.12 08-01-2011
Model : 0x00000000 RAM
R
... Doneo
<Winbond W25Q32>


cur : 0x8, ne
Ker0x8
Flash Type : 0x00000000est_addr = 0x00100000, u
This is a valid image.!!!!tart flash_writer
Compressed0028AC00
Verify Image : 0x01900000Kernel was found (0x01500000)...ithin 1 sec...: 0x00000000s received]] - Complete
... Done
[NG0x0000FDB1]art [0x0010000
F

Boot : Egmont(C3
i_header->pul_start_addr : 0x000000000x00000000
<Winbond W25Q32>te
te
src_addr = 0x
Decompressing Kernel to RAMey to execute Monitor Progr
....Done.<HS><HS>

Decompress ......1500000)...
Image includes...........
D.
Image Type : 0x00000000........................_addr = 0x0150000C, dest_addr = 0x00100000, ul_sStart [0x00100000]
Verify Image

FW Upgrade JUMP : 00384DD
temp_buf : $KER, dest_addr = 0
SIG : $IMGu_header->pu

FlashCheckSum

check sum start address : 0190001C, count : 004100000]........................... command info.]
Found new kernel(0x0194001C)!


... Done

<Winbond W25Q32>0x00100000, ul_si
Decompress ....
GO MonitorEntryd Start F------------------------

Press any key to execute Monitor Program within 1 sec...ernel Data Read End
... Done
.

S
START-UP MODE : Mnew : 0x8

Decompress ..................sed Kerne
Kern
[Type 'help'art From Seria
Kernel Data Read Start Froml t
s
Decompress ....................................................................
<Winbond W25Q32>
Ker
Flash Type : 0x00000000est_addr =
--------------------------------------
Compressed0028


Target Name: vxTa

Download I
<Winbond W25= 0x00100000,
Model Done

Boot : Egmont(C3N) V0.12 08-01-2011M
Kernel Start [0x00100000]es
Flash Type : 0x00000000ec...
{=er

Verify Image
Version : Egmont(C3N) V0.12 08-01000(0x01500000)...
Kernel Data
temp_bu
<Winbond W25Q32>: $IMG
[NG0x0000FDB1]art [0x


... Doneind sign
Kernel Start [0x00100000]E : Monitor Programfrom PCmpressed Kernel was fo
<Winbond W25Q32>te
{d
D
Ready to do Kernel to

FW Upgrade JUMP : 00384DD4 [Type 'help' to see commanssing Kernel to RAM


Decompress ....................................................................emp_buf : $KERrogram with
temp_buf
SIG : $IMGst_addr =

FlashCheckSum
GO Moni: $IMGu


... Done start aheckSum
Kernel Start [0x00100000] 00400000----------------04100000]...........................

FW Upgrade JUMP : 00384DD4
check sum : 0... Done

<Winbond W25Q32
<Winbond W25Q32>
[NG

Press any key to execute Monitor Program within 1 sec...(C3N) V0.12 08-01-2011ecute Monitor Program within 1 sec...ernel Data Read End
i_head
GO MonitorEntryd
<Winbond W25T-UP MODE : M

----------------------------------------------------------------ecute Monitor Program within 1 sec...: 0x00000000el Data Read Start Froml t
s
Decompress .........................................
START-UP MODE : Monitox000

invalid command format0000C, dest_addr = 0x0
--------------------------------------

vxshell> flize = 0x002


Target

Upgrade Flash
<Winbond W25
Model

Boo
<Winbond W25Q32>.12 08-01-2011M
Verify Image : 0x01900000....Done.<HS><HS>00000ec...
Version : Eg
Image include2 08-01000
Im
i_header->pul_start_addr : 0x00000000) ->_header->ul_coup_bu
<Winbond W25Q32>: $IMG
Kernel Start [0x0ign
i_header->ul_count : 0x00000000 Upgrade JUMP : 00384DD4eived]] - Como
Model : 0x00000000er->pul_start_addJUMP : 00384DD4 [Type 'help' to see comma
Can not find signature
GO MonitorEntryk su


Download Image fro
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000N) V0.12 08-
Model : 0x05000063Flash Type : 0x0
Flash Type : 0x00130002........................
Image Type : 0x00000000.................emp_buf
temp_buf : $KERth
SIG : $IMG

FlashCheckSum

check sum start address : 0190001C, count : 00400000

FlashCheckSum
GO Moni
check sum : 0000A5A5
Kern
} /* Checksum End00] 00400000-----

Source Checksum is valid
Boot image!
FW Upgrad
Found new kernel(0x0194001C)!!!!
check sum : 0
... DonePress an
cur : 0x8, new : 0x8tor Program within 1
This is a valid image.!!!!11

Loading boot application...
i
[NG0x0000FDB1]MonitorEntryd

Boot : Egmont(C3N) V0.12 08-01-2011

------------------------------
<Winbond W25Q32>----------------e

Press any key to execute Monitor Program within 1 sec...
GO MonitorEntry

----------------------------------------------------------------

invalid command format0000C, dest_addr = 0x0
START-UP MODE : Monitor Program
vxshell> flize = 0x002
[Type 'help' to se Flash
Start flash_writer
Image
===============================der->pul_start_addr : 0x0000000
<Winbond W25Q32>ou
Verify Image : 0x01900000
Kernel Start [0x0
i_header->pul_start_addr : 0x000000000 Upgrade JUMP : 00384DD4eived]] - Co
i_header->ul_count : 0x00000000
Model : 0x00000000er->pul_start_add
Flash Type : 0x00000000
Can not find s
Image Type : 0x00000000
GO MonitorEntryk s
temp_buf :

SIG : $IMGImage fro

Ready to download from Parallel/Usb/Serial (0x01900000)art address : 0190001C, count :
------------------------- Image : 0x01
Samsung OTG, 2006
Link ID : [4F54281A] = [4F542000]0x00000000
-------------------------count : 0x00400000
....Done.<HS><HS>
Image includes PJL(0000001B) -> Waste 92 bytes
Flash Type : 0x00130002
[[4194424 Bytes received]] - Complete Downloading
temp_buf : $KER
Verify Image : 0x01900000
i_header->pul_start_addr : 0x00000000
i_header->ul_count : 0x00400000
Model : 0x05000063
Flash Type : 0x00130002
Image Type : 0x00000000
temp_buf : $KER
SIG : $IMG

FlashCheckSum

check sum start address : 0190001C, count : 00400000
check sum : 0000A5A5
} /* Checksum End

Source Checksum is valid
Boot image!
Found new kernel(0x0194001C)!!!!
Decompress ....................................................................
... Done
Decompress ....................................................................
... Done
cur : 0x8, new : 0x8
This is a valid image.!!!

[Mishel01]

"Многабукаф. Ниасилил"(с)
В чем проблема, короче?

[MADBeasT]

Короче залили необновляемую прошивку с неверным серийником. При попытке прошить через DEBUG- кабель все вроде идет. Потом останавливается на This is a valid image.!!!! и все!!!

[pro_vi]

При попытке прошить через DEBUG- кабель все вроде идет. Потом останавливается на This is a valid image.!!!! и все!!!

из лога что-то не увидел что заливается в принудиловке через дебаг. для этого нужно дать команду fl, а где она у вас?
вход в проб-режим тут такой же как и у scx-3200 (описан много раз, повторяться не буду)

лог какой то коцаный....поменяйте юсб-кабель на толстый экранированный (лучше с фильтрами) и комп не мешает сменить от греха.
также, возможно, следует сделать сброс память (тоже описано в нете на примере scx-3200)

[MADBeasT]

fl вводил. Лог не весь скопировался. Кабель толстый экранированный. Попробую сделать сброс памяти.

[MADBeasT]

Может аську дадите?

[MADBeasT]

Сегодня с утра включаю агрегат. Он горит синим (спящий режим) и не включается. Что за нах такой?

[MADBeasT]

точно устал наверное, и мы от него. Как его теперь разбудить?

[MADBeasT]

Он походу советский. Под конец рабочего дня разбудил его ударом кулаком в бочину)))))))))))))))) (нервы не выдержали). Завтра буду дальше колдовать.

[CrazyPOVT]

Он походу советский. Под конец рабочего дня разбудил его ударом кулаком в бочину

Тёплая ламповая печать...