Коды ошибок в Canon NP7161

E000
The thermistor (TH1, TH2) has poor contact or an open circuit
The fixing heater (H1) has an open circuit
The thermal switch (TSW1) has turned on
The triac is faulty
The DC controller PCB is faulty
E001
The thermistor (TH1, TH2) has a short circuit
The triac is faulty
The DC controller PCB is faulty
E002
E003 The thermistor (TH1, TH2) has poor contact or an open circuit
The fixing heater (H1) has an open circuit
The thermal switch (TSW1) has turned on
The triac is faulty
The DC controller PCB is faulty
E004
The triac has a short circuit
The DC controller PCB is faulty
E010
The main motor (M1) is faulty
The DC controller PCB is faulty
E013
The waste toner feedscrew is locked
The waste toner feedscrew lock sensor (PS8) is faulty
The DC controller PCB is faulty
E030
The total copy counter has an open circuit
The DC controller PCB is faulty
E031
The accessories counter has an open circuit
The DC controller PCB is faulty
E208
The mirror home position sensor (PS3) is faulty
The mirror motor (M4) is faulty
The DC controller PCB is faulty
E210
The lens home position sensor (PS2) is faulty
The lens motor (M3) is faulty
The DC controller PCB is faulty
E220
The lamp regulator PCB is faulty
The DC controller PCB is faulty
E261
The power supply frequency is faulty
The power supply PCB is faulty
E710
E711
The DC controller PCB is faulty
E712
The DC controller PCB is faulty
The ADF controller PCB is fault
The ADF cable is faulty
E717
The DC controller PCB is faulty
The Remote Diagnostic Device II PCB is faulty
E800
The auto power-off circuit has an open circuit
The DC controller PCB is faulty
E805
The exhaust fan (FM2, FM4) is faulty
The DC controller PCB is faulty
E821
The ozone filter is clogged
The cleaner thermistor (TH3) has poor contact or an open circuit
The DC controller PCB is faulty