Коды ошибок в Canon 6045

E000 Fuser did not heat up. Lamp, thermal switch, thermistors, connections, AC driver, DC controller, SSR, etc
E001 Fuser temperature too high. Same possibilities as E000, as well as shorted wire
E002 Fuser temperature not rising at correct pace, same possibilities as E000
E003 Fuser temperature drops. Same as E000
E004 Fuser problem: AC driver, SSR bad, wire shorted
E005 Fuser cleaning web, or problem with sensor, lever or connector. Service mode 6 is the probably reset for this
E006 Fuser feed connector
E010 Drive problem. Main motor, gears, etc
E013 Waste toner drive problem, or waste toner sensor switch has been actuated too many times
E015 Pickup motor power supply. Could be bad motor or motor board, or DC controller
E020 Problem with developer unit, toner hopper, hopper motor, connection, sensor or DC controller
E030 Total counter
E031 Option counter or total counter
E050 Holding tray (duplex) home position sensor motor or board
E051 Holding tray (duplex) home sensor motor or board
E202 Panel locked up, but might be no Код ошибки, scan motor problem
E203 Scan problem or scan sensor
E204 Scan problem or scan sensor
E210 Lens sensor or motor problem
E212 Lens sensor or motor problem
E213 Scan lock sensor or lock solenoid
E220 Exposure lamp regulator board
E240 DC controller or composite power supply problem
E243 DC controller
E400 RDF to copier communication problem
E401 RDF pickup motor or pickup sensor
E402 RDF belt motor or pulse sensor
E403 RDF feed motor or pulse sensor
E411 RDF tray sensor or registration sensor
E500 Sorter main board or communication with copier
E510 Sorter feed motor
E522 Sorter push bar motor
E523 Sorter reference wall motor
E524 Sorter multi-guide motor
E525 Sorter bin paper sensor automatic adjustment problem
E526 Sorter bin paper sensor automatic adjustment problem
E530 Sorter guide bar motor
E531 Sorter stapler motor
E532 Stapler motor
E533 Stapler inside paper sensor
E540 Sorter bin shift motor
E550 Sorter power supply
E710 DC controller
E711 DC controller
E712 Document feeder IC failure
E713 DC controller, sorter
E800 Auto power off circuit problem. Main switch or DC controller
E802 Auto power off circuit problem. Main switch or DC controller